Lithofin MN Slate Seal - High Gloss Sealer - 1 Litre

Availability: In stock

Product code: 4001524016818

Lithofin MN Slate Seal High Gloss Sealer - 1 Litre

A solvent based acrylate sealant that produces a high sheen finish, whilst intensifying and protecting the colours and aids maintenance on riven / rough multi-coloured slate.

A special product from the Lithofin range for marble, natural and artificial stone (MN). Lithofin MN Slate-Seal contains high-quality acrylates, suspended in organic solvents and it is ready-to-use. Lithofin MN Slate Seal provides a high gloss protective layer which prevents the penetration of water and dirt. It also heightens the colour of coated surfaces and makes them less susceptible to damage and easier to clean. Water vapour permeability is retained. The slip resistance is hardly affected. The coat is durable, it does not turn yellow and is conditionally weather-resistant

Field of application and suitable surfaces:
Provides a high gloss seal for all absorbent, porous natural stone, particularly for internal applications. Particularly suitable for Indian or Chinese slate with a naturally rough surface. Not suitable for polished and fine honed surfaces.

Please Note:
Great care must be taken not to allow any wetness to permeate the sealed surface either from above or from below, to prevent the sealant turning white! Apply Lithofin MN Slate Seal uniformly with a foam roller or soft brush. In the case of strongly absorbent surfaces repeat process twice. Glass, polished surfaces and other solvent resistant parts should be protected against splashes. Do not use in bright sunlight or in temperatures below 5°C or over 25°C. The application tools can be cleaned using thinner or white spirit. To remove Lithofin MN Slate-Seal we recommend Lithofin MN Power Clean.

used indoors - several years with correct care; used outdoors - depending on the support and the weather, about 1 year. If deterioration occurs, reapply. However, this product is not particularly suited for external applications.

Directions for use:
The surface should be absorbent, clean and dry. Non absorbent surfaces cannot be sealed. Apply to a small test area.

about 10m2/L, for multi-coloured riven slate and rough sandstone.

Drying time:
about 45 minutes at 20°C per thin coat.
Lithofin MN Slate Seal Storage: Store in a cool, dry place.

Shelf life:
about 5 years. Safety: Ventilate the area well during and after application. Do not use in large quantities in which open or lightly wrapped food is stored. Keep out of reach of children. Not dangerous after drying. Labelling requirements in accordance with Dangerous Material Regulations or EC Guideline 88/379: Flammable ADR/RID: Class3, No.31c (does not apply to cartons with 1L and 5L).

In accordance with EC regulations: aromatic and aliphatic hydrocarbons, acrylates.

Technical data:
Density: about 0.83g/cm3 ? Flash point: 25°C (c.C) ? Appearance: clear, colourless ? Odour: aromatic, like Benzene

1L bottle with childproof cap (10 per carton)
5L carton (2 per carton). 


Brand Lithofin
  AL, CB, CM, CO, GU, HP, IP, LU, ME, MK, NN, NR, OX, PE, RG, RH, RM, SG, SL, SS, WD £51.00  
  B, BA, BB, BD, BH, BL, BN, BR, BS, CF, CH, CR, CT, CV, CW, DA, DE, DH, DL, DN, DY, EN, FY, GL, HA, HD, HG, HR, HU, HX, IG, KT, L, LA, LE, LN, LS, M, NE, NG, NP, PO1-22, PR, RM, S, SK, SM, SN, SO, SP, SR, ST, TA, TF, TN, TS, TW, UB, WA, WF, WN, WR, WS, WV, YO £55.00  
  CA, DT, E, E, EC, EX, LD, N, NW, PL, SE, SW, SY, TQ, TR, W, WC £63.00  
  DG, EH, FK, G, KA, KY, LL, ML, PA1-19, SA, TD £75.00  
  AB, DD, IV, KW1-14, PA21-41, PH, PH1-7 £102.00  

Write Your Own Review

You're reviewing: Lithofin MN Slate Seal - High Gloss Sealer - 1 Litre

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.